DVTELL Ioimage trk-101 Installationshandbuch Seite 17

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 35
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 16
Installing and Connecting the Unit
5
3. Installing and Connecting the Unit
This section describes how to install and connect the unit and includes the following sections:
Installing the Unit (page 5)
Connecting the Unit (page 7)
Resetting the Unit (page 14)
Note:
After connecting the unit, proceed to configure the unit as described in the HTML Edition
Units User’s Guide.
3.1 Installing the Unit
The unit can be installed and mounted next to the camera (inside the camera enclosure).
Alternatively, the unit can be installed inside an equipment room on a shelf or in a rack using the rack
mount panel that is available as an optional accessory.
When installing the unit make sure that:
It is securely tied down and cannot be easily dislodged
Operating temperatures, at all times, are kept between the minimum/maximum allowed
Proper ventilation is provided so that the air is free to circulate around the unit
The unit is protected from direct weather conditions (for example, sunlight, rain, dust, and so on)
Caution:
To avoid damage from overheating or unit failure, assure that there is sufficient
temperature regulation to support the unit’s requirements (cooling/heating). Operating
temperature should be kept in the range specified for the product (0° to 60°C/32° to 140°F),
with no more than 95% non-condensing humidity.
Attention:
Afin d'éviter tout dommage dû à une surchauffe ou toute panne de l'unité, assurez-vous que
la régulation de température est suffisante pour répondre aux exigences de l'unité
(refroidissement/chauffage). La température de fonctionnement doit être maintenue dans la
plage de température spécifiée pour le produit ( à 60°C/32° à 140°F), sans condensation
d'humidité supérieur à 95%.
3.1.1 Assembling the Unit in a Rack Mount Panel (Optional Accessory)
Up to 10 units can be mounted on a single rack mount panel. After the units have been assembled in the
rack mount panel, the panel can be installed in a standard 19-inch rack.
Seitenansicht 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 34 35

Kommentare zu diesen Handbüchern

Keine Kommentare